How to Connect JLab Earbuds?

conectivity of Jlab earbuds
Published: by

JLab is a company known for its affordable and high-quality audio products, and its earbuds are no exception. If you’re looking for a pair of earbuds that won’t break the bank but will still provide great sound quality, JLab’s earbuds are a great option. But how do you connect them?

In this article, we’ll walk you through the process step-by-step so that you can get your music back up and running in no time.

How to Put JLab Earbuds in Pairing Mode?

Put JLab earbuds in pairing mode if you are using them for the first time. You need to follow the below steps.

  1. Firstly you need to take the earbuds out of the charging case.
  2. Then you need to press and hold down both the touch sensors for about 3 seconds until you see an LED light flashing. The left earbud indicates solid white light and the right earbud starts blinking blue/white light.
  3. Once the earbuds are in pairing mode, you should see them appear on your device’s Bluetooth list as “JLab JBuds”.
  4. Select “JLab JBuds” from the list of available devices.

How to Connect JLab Earbuds to iPhone?

If you’re using an iPhone, you can simply connect your JLab earbuds to your device via Bluetooth.

  1. Open the Settings app and tap “Bluetooth.”
  2. Turn on the Bluetooth and it will start searching for the nearby available earbuds.
  3. Find the listing for your JLab earbuds on other devices and tap on it.
  4. Your earbuds indicate solid white light once it’s connected.

How to Connect JLab Earbuds to Android?

If you’re using an Android phone, the process is a little bit different.

  1. First, open the Settings app and tap “Connections.”
  2. Then, tap “Bluetooth.” and turn the Bluetooth on.
  3. Find the listing for your JLab earbuds and tap on it.
  4. Once it’s connected, you’ll see a solid white light on both earbuds.

How to Connect JLab Earbuds to the Computer?

You can also connect your JLab earbuds to your computer if you want. To do this, you need to follow the below simple steps.

  1. First, make sure that your earbuds are in the “Pairing” mode.
  2. Once your earbuds are in Pairing mode, open the Bluetooth settings on your computer.
  3. On a Windows PC, you can access the Bluetooth settings by clicking the notification icon in the bottom right-hand corner of your screen, then Right-Click “Bluetooth” and go to settings.
  4. Click on ‘Add Bluetooth or another device’.
  5. The new windows pop up. Then click on ‘Bluetooth’ it will start searching for the JLab earbuds.
  6. Click to connect ‘JLab earbuds’ with your computer to start listening to your favorite music.

How to Connect JLab Earbuds to Mac?

The process of connecting JLab earbuds to MacBook Air is similar to connecting them to a Windows PC.

  1. First, make sure that your earbuds are in the “Pairing” mode.
  2. Then open the Bluetooth settings on your MacBook Air.
  3. Click on the “Bluetooth” icon in the menu bar and select “Open Bluetooth Preferences.”
  4. Click on the “+” button to add a new device.
  5. Your MacBook Air will start scanning for devices and should find your JLab earbuds.
  6. Click on “Connect” to connect your earbuds to your MacBook Air.

Related Post

  1. Jabra Elite 65t volume is too low
  2. Sony wh-1000xm5 won’t turn on
  3. why do my Sony headphones keep pausing

Conclusion:

 Connect JLab Earbuds to your device, you typically need to start by ensuring your earbuds are charged. Then, turn on your device’s Bluetooth and place the earbuds in pairing mode.

Your device should be able to detect the earbuds, allowing you to select them from the list of available devices.

If you encounter any issues, refer to the user manual or contact JLab’s customer service. Remember, each model may have slightly different instructions, so it’s important to refer to the specific guide for your model of JLab Earbuds.

FAQs

Why are my JLAB earbuds not connecting?

First, make sure that they are in pairing mode. If they are, then check to see if your device’s Bluetooth is turned on and that it is within range of your earbuds. If all else fails, try restarting your devices or resetting your earbuds.

How do I know if my JLAB earbuds are connected?

Once your JLAB earbuds are successfully connected to your device, you’ll see a solid white light on both earbuds. If you only see a blinking white light, that means your earbuds are in Pairing mode.

How do I disconnect my JLAB earbuds?

To disconnect your JLAB earbuds, simply turn off the Bluetooth on your device. This will cause the earbuds to automatically disconnect. Alternatively, you can press and hold the button on the earbuds for 3 seconds to manually disconnect them.

How can I tell if my JLAB earbuds are charged?

When your JLAB earbuds are charging, you’ll see a blinking red light on the case. Once they’re fully charged, the light will turn solid white.