Jabra Elite 65t Volume Too Low – Ultimate Guide

If you’re experiencing low volume on your Jabra Elite 65t earbuds, don’t worry you’re not alone. A lot of people are reporting volume issues with these earbuds.

But the good news is, most of the time it’s not an issue with the earbuds themselves, but rather a lack of knowledge about how the device works and what its controls are.

In this ultimate guide, we’ll show you how to fix your Jabra Elite 65t low volume issue so that you can enjoy your music at the proper volume.

1. Adjust the Volume to Your Preference

The first thing you should do if you’re having volume issues is to adjust the earbuds themselves. The Jabra Elite 65t earbuds have physical volume control buttons on the left earbud indicated with the two dots. Volume up and volume down buttons.

To increase the volume, connect your Jabra Elite 65t with your Bluetooth-enabled device and play music then simply press and hold the volume up button on your left earbud and it will flash a green LED light until you reach your desired volume.

To decrease the volume, press and hold the volume down button on your left earbud and a green LED light will flash on the earbud.

2. Turn off the Audio Limiter.

If you’re still having trouble adjusting the volume to your preference, it’s possible that the audio limiter is enabled on your device with which the earbuds are connected.

The audio limiter is a safety feature that limits the maximum volume output of the earbuds to protect your hearing.

To disable the audio limiter, connect your Jabra Elite 65t with your Bluetooth-enabled device and play music on it. Then, simply press the volume up button on your device and increase the volume to 100% max.

The audio limiter will be disabled and you’ll be able to hear your music at a higher volume.

3. Bluetooth connection problem

It may be possible that there’s a problem with your Bluetooth connection.

First, try disconnecting and reconnecting your Jabra Elite 65t to your device. If that doesn’t work, try restarting both your earbuds and your device.

If you’re still having trouble, it’s possible that there’s interference with your Bluetooth connection.

Try moving away from any potential sources of interference such as microwaves, cordless phones, and other Bluetooth devices.

4. Use Jabra Sound+ app

We recommend downloading the Jabra Sound+ app. The app is available for Android and iOS devices and it’ll allow you to customize the sound of your earbuds to your liking as well as increase the maximum volume.

Once you’ve downloaded the app, simply open it and connect your Jabra Elite 65t earbuds. Then, go to the settings tab and increase the maximum volume.

5. Clean your dirty Earbuds

Another possible reason for low volume is that the speaker grills of your earbuds are too dirty and the sound is not properly coming out from the earbuds. It’s probably time to give them a good cleaning.

The best way to clean your earbuds is with a cotton swab and some rubbing alcohol. Just dampen the cotton swab with the rubbing alcohol and rub it over the dirty areas of your earbuds. The rubbing alcohol will break down the dirt and grime, and the cotton swab will help to remove it.

If your earbuds are really dirty, you can also try using a toothbrush to scrub them clean. Gently brush the bristles over the dirty areas.

By following these simple tips, you can keep your Jabra earbuds clean and working properly.

6. Fully Charge Your Jabra Elite 65t

If your Jabra Elite 65t earphones aren’t fully charged, you may experience a lack of volume. When the earbuds are running low on battery, the sound quality will start to degrade and the volume will be lower than usual.

Make sure to keep your earbuds fully charged so you can enjoy the best sound quality. After a full charge, you can try to increase the volume as much as possible and see if the problem has been resolved.

7. Update Firmware of your Jabra Elite 65t

If you’re still experiencing low volume even after trying all of the above tips, there may be an issue with the firmware of your Jabra Elite 65t. In this case, you’ll need to update the firmware to the latest version.

To do this, simply connect your earbuds to your device and open the Jabra Sound+ app. Once the app has detected your earbuds, click on the “Settings” icon and then select “Firmware update.”

If a new firmware update is available, simply follow the prompts to install it. Restart your earbuds after the upgrade is finished, then try raising the volume again to see if the problem has been fixed.

8. Try to Reset Your Jabra Elite 65t

If your Jabra Elite 65t earbuds are still not working after trying all of the above steps, you can try resetting them to factory settings. This will delete all saved data on your earbuds and start from scratch, so make sure you have your earbuds paired with your device before doing this.

  1. To reset your Jabra Elite 65t, Turn on your Jabra right earbuds.
  2. Press and hold the *Multifunction Button* on your right earbud for 10 seconds.
  3. The LED light on the right earbud will flash red and purple alternately to indicate that the earbuds have been reset successfully.
  4. Once the earbuds are reset, try to connect them to your device again and see if they work.


There are a variety of reasons why your Jabra earbuds may be experiencing low volume. We’ve outlined 8 potential solutions that you can try to resolve the issue. If none of these tips work, it may be necessary to contact Jabra customer support for further assistance.


How do I make my Jabra 65t louder?

You can adjust the volume of your Jabra 65t earbuds by using the volume control buttons on the left earbud themselves. Alternatively, you can use the Jabra Sound+ app to adjust the volume settings.