Beats Solo 3 Won’t Turn On Or Charge [Solved]

It’s frustrating when your Beats Solo 3 won’t turn on or charge. However, the simplest method to turn it on is to hold the power button down until you see the light turn on.

But if it still doesn’t turn on, then I guess there are something is going wrong with your Beats Solo 3.

There is no doubt it is one of the best headphones on the market now. They have a great sound quality, and compatibility with PlayStations, iPhone, Mac, and PC, and many people choose beats to solo 3 for daily use.

Many of its users, however, have complained about various platforms such as Reddit or Quora that their Beats Solo 3 will not turn on or charge and also about connectivity with other devices.

That’s why I decide to write this article to show you some solutions if your Beats Solo 3 won’t turn on or charge.

Disclaimer: If you buy through affiliate links on this article, we may earn a commission without any additional cost to you.

How to Fix Beats Solo 3 Won’t Turn on or Charge:

Before we get into the solutions, there are a few things you must have:

  • micro-USB cable
  • USB adopter
  • Solo 3 headphones
$148.99
as of November 5, 2023 5:10 am
Amazon.com
$99.95
$199.95
3 new from $99.95
9 used from $78.96
as of November 5, 2023 5:10 am
Amazon.com
Last updated on November 5, 2023 5:10 am

Fully Charge Your Beats Solo 3:

The first thing you should do is to make sure that your Beats Solo 3 are fully charged if they are not turning on.

To do this, connect the USB cable to the Solo 3 and then plug it into a power source. Once it’s plugged in, the light on the Beats Solo 3 will turn red. Leave it plugged in until the 3 white lights, which means it’s nearly fully charged.

If your Solo 3 still will not turn on after being fully charged, then please continue to the following solutions.

Check the Wire and the Power Outlet:

The next thing you should do is check the wire and the power outlet. Make sure that the charging wire is not damaged and that it is properly plugged into the power outlet.

Most of the time when you twisted and roll the wire too much, which damages the USB cable. Because of this, your Solo 3 won’t receive enough power and will be unable to turn on or charge.

You should also try to use different power outlets just in case the outlet you are using isn’t providing enough power.

If your Beats Solo 3 still will not turn on after checking the wire and the power outlet, then please continue to the following solutions.

Restart Beats Solo 3

Sometimes the solution for everything is just to restart the device. Turning your Beats headphones off and on again might solve your problem.

To restart your Beats Solo 3:

  • Hold down the power button for about 10 seconds until you see the light turn off.
  • Hold down the power button again after a few seconds to turn it on
  • if it turns on then connect it with the charger and check if it charges.

if restarting does not solve your problem then try the next solution.

Hard Reset Beats Solo 3:

If non of the above solutions works then you might need to do a hard reset on your Beats Solo 3 because there are many chances that a software glitch is a problem.

Restoring your beats solo 3 to its factory settings is a common troubleshooting technique. This should solve the issue of not turning on or charging and allow you to use your gadget

Check if your Beats Solo 3 turns on and charges, If the problem persists after trying these methods, it might be time to try the next solution.

Update the firmware:

There is a possibility that updating the firmware may fix the problem with your Beats Solo 3. Many times your headphones (Bose 700) do not turn off or on due to firmware, it is always good to keep updating firmware on time.

You can go to Beats’ website to download the latest firmware for your Beats Solo 3 and then follow the instruction to install it.

  • connect your beats with a PC or Mac and open the updater application.
  • Once the application is open, click on the “Status” icon under the Main menu.
  • Select beats solo 3 from the list and click on “Update.”
  • Now you have to follow the on-screen instructions to complete the firmware update.

Once the update is completed, try to turn it on and see if it’s charging.

Check your headphones for water and sweat damage:

If your Beats Solo 3 has been exposed to water or sweat, it might not turn on or charge. If that’s the case:

  • Take the headphones apart: remove the screws on the back of the ear cups.
  • Dry everything off: make sure all the parts are completely dry before you put them back together.

Now plug them into the power outlet: if they still don’t work, then move to the next solution.

Remove or Replace Faulty Battery:

If your Solo 3 will not turn on or charge, the battery might be the issue. To check if that’s the problem:

Unpair the beats solo 3 from any device like iPhone and remove the batteries. to remove the battery, push down on the battery release button and pull out the battery.

Take a look at the batteries: are they bulging or leaking? If so, then you need to replace them.

Replace the old batteries with new ones: make sure the polarity is correct before you put them back in.

Put the batteries back in and pair the headphones with iPhone and check if they still don’t work, then all you have to do is to bring them to an Apple store.

Conclusion:

Beats Solo 3 is one of the most popular headphones on the market and it’s not surprising that there might be some problems with it.

These are the solutions you can try if your Solo 3 is not turning on or charging: restart the device, hard reset, update the firmware, check for water and sweat damage, and remove or replace the faulty battery. If none of these options work, you may need to take your headphones to an Apple store.